Step 01.01: Mark the Slot Angle
Draw two parallel lines at a 15-degree tilt across the top surface, half an inch wide.
Callouts & Parts
M1
Cutting the Groove
Woodworking & FurnitureBeginner< 2 hrs
Desktop Hardwood Phone Stand
An angled wooden smartphone rest with a cable cutout for clean desk charging.
CJVerified Seller
· updated about 1 month agoBuild progress · 0/4 steps0%
0 of 4 steps completed
Step 01.02: Saw the Phone Slot
Cut along your marked lines using the handsaw to a depth of roughly 3/4 inch, then clear out the waste wood.
Step 02.01: Sand All Surfaces
Sand the entire block and the inside of the slot using the 120-grit sponge until smooth to the touch.
Step 02.02: Apply Wood Finish
Wipe a thin layer of Danish oil across all faces with a rag and let it dry.
Desktop Hardwood Phone Stand
Bill of Materials & Tools
Materials
| Have | Item Name | Qty | Unit | Vendor |
|---|---|---|---|---|
| Walnut Board Cutoff (6" x 3") | 1 | pcs | Homedepot | |
| Danish Oil Wood Finish (Sample) | 1 | pcs | Amazon |
Tools
| Have | Item Name | Qty | Unit | Vendor |
|---|---|---|---|---|
| Handsaw | 1 | pcs | Amazon | |
| 120-Grit Sanding Sponge | 1 | pcs | Homedepot |
Milestones & Build Steps
Milestone 01 · Cutting the Groove
Angling the slot to hold the phone securely.
Step 01.01·Mark the Slot Angle
Draw two parallel lines at a 15-degree tilt across the top surface, half an inch wide.
123Callouts & Parts
- ①M3 — 3A
- ②m8 — 3.5
- ③m4 — 6
1234Callouts & Parts
- ①m7 — 4
- ②label — note
- ③ee — 3.5
- ④qq
Step 01.02·Saw the Phone Slot
Cut along your marked lines using the handsaw to a depth of roughly 3/4 inch, then clear out the waste wood.
Milestone 02 · Sanding & Finishing
Smoothing sharp edges and applying the protective coat.
Step 02.01·Sand All Surfaces
Sand the entire block and the inside of the slot using the 120-grit sponge until smooth to the touch.
Step 02.02·Apply Wood Finish
Wipe a thin layer of Danish oil across all faces with a rag and let it dry.