Step 01.01: Mount Fan and Filter Grid
Cut the carbon sheet to 120mm x 120mm using utility shears. Place the sheet against the intake side of the fan and secure it using four M4 x 35mm machine screws.
M1
Chassis & Filter Assembly
Electronics & IoTBeginnerHalf Day build
Desktop Solder Fume Extractor
A compact, quiet 120mm benchtop fume extractor using an active carbon filter and an adjustable PWM speed controller.
CJVerified Seller
· updated about 1 month agoBuild progress · 0/1 steps0%
0 of 1 step completed
Desktop Solder Fume Extractor
Bill of Materials & Tools
Materials
| Have | Item Name | Qty | Unit | Vendor |
|---|---|---|---|---|
| Noctua | 1 | pcs | Amazon | |
| 12V | 1 | pcs | — |
Tools
| Have | Item Name | Qty | Unit | Vendor |
|---|---|---|---|---|
| CarbonOptional | 1 | pack | Amazon |
Milestones & Build Steps
Milestone 01 · Chassis & Filter Assembly
Preparing the housing and mounting the activated carbon sheet.
Step 01.01·Mount Fan and Filter Grid
Cut the carbon sheet to 120mm x 120mm using utility shears. Place the sheet against the intake side of the fan and secure it using four M4 x 35mm machine screws.