Step 01.01: Edge Gluing White Oak Panels
Alternate annual ring growth curvature (bark up, bark down) across boards to balance wood movement. Apply Titebond II and clamp with parallel bar clamps.
M1
Milling & Carcass Domino Joinery
Woodworking & FurnitureIntermediateWeekend build
Mid-Century Modern Smart Vinyl Console
Solid white oak turntable credenza with tambour sliding doors, floating isolation shelf, and smart LED mood lighting.
strumico
· updated about 1 month agoBuild progress · 0/4 steps0%
0 of 4 steps completed
Step 02.01: Tambour Canvas Glue Lamination
Clamp 48 precisely milled oak slats side by side. Roll heavy duck canvas with contact cement and bond across the back faces to create the flexible sliding door.
Step 03.01: Splayed Taper Cutting on Table Saw
Use a micro-adjustable tapering jig set to 3.5 degrees to cut double-tapers on all four leg blanks.
Step 04.01: Buffing Rubio Monocoat 2C Finish
Water-pop grain, sand to 150 grit, and buff 2-component clear hardwax oil into the wood with a white Scotch-Brite pad.
Mid-Century Modern Smart Vinyl Console
Bill of Materials & Tools
Materials
| Have | Item Name | Qty | Unit | Vendor |
|---|---|---|---|---|
| 4/4 FAS Kiln-Dried White Oak Lumber (50 BF) | 50 | bf | Home Depot | |
| Heavy Cotton Duck Canvas Roll (10 oz) | 1 | roll | Amazon | |
| Turned Tapered Solid Brass Leg Ferrules | 1 | pack | Amazon | |
| Rubio Monocoat Oil Plus 2C Pure (350ml) | 1 | can | Amazon |
Tools
| Have | Item Name | Qty | Unit | Vendor |
|---|---|---|---|---|
| Aluminum Table Saw Tapering Jig | 1 | pcs | Amazon |
Milestones & Build Steps
Milestone 01 · Milling & Carcass Domino Joinery
Break down white oak boards, surface through planer, and rout mortises for floating tenons.
Step 01.01·Edge Gluing White Oak Panels
Alternate annual ring growth curvature (bark up, bark down) across boards to balance wood movement. Apply Titebond II and clamp with parallel bar clamps.
1Callouts & Parts
- ①m3 — 3.5
Milestone 02 · Routing Curved Tambour Track & Slats
Rout C-track curves on panels and laminate thin oak slats onto canvas backing.
Step 02.01·Tambour Canvas Glue Lamination
Clamp 48 precisely milled oak slats side by side. Roll heavy duck canvas with contact cement and bond across the back faces to create the flexible sliding door.
Milestone 03 · Tapered Splayed Leg Base & Brass Ferrules
Turn 12-degree splayed legs, install brass inserts, and glue the under-apron.
Step 03.01·Splayed Taper Cutting on Table Saw
Use a micro-adjustable tapering jig set to 3.5 degrees to cut double-tapers on all four leg blanks.
Milestone 04 · Integrated Lighting & Hardwax Oil
Solder hidden warm-white LED channel with reed switches and apply matte hardwax oil.
Step 04.01·Buffing Rubio Monocoat 2C Finish
Water-pop grain, sand to 150 grit, and buff 2-component clear hardwax oil into the wood with a white Scotch-Brite pad.
